MODEL: S1389CI/S1389NI Version: 1.
Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
VERSION: 140320.15.3 This product has been manufactured and tested to the highest quality standards by SUMERAIN sanitary Inc("SUMERAIN").This warranty is limited to SUMERAIN products which are purchased by a consumer in the China after Jan 1,2010 and installed in China or the state which has SUMERAIN technical support department locally.(visit http://www.sumerain.com/en/supportcenter.asp for review the state list of SUMERAIN technical support department).
Function Bathroom Sink Faucets Feature Wall mount Theme Modern ,Contemporary Configuration Vessel Finish Chrome(S1389CI)/Nickel brushed(S1389NI) Installation Holes Two Number of Handles One Handle style Lever Faucet Total Height Adjustable Spout Reach 188mm [7-7/16”] Spout Height Adjustable Installation type Wall mounted Valve Type Ceramic disc Faucet Body Material Brass Spout Material Brass Handle Material Metal Net Weight 1.9 KG [4,18lbs ] Gross Weight 2.
FRONT VIEW OF FAUCET RIGHT SIDE VIEW OF FAUCET
CODE ITEM NAME QTY CODE ITEM NAME QTY 1389001 Rough-in valve 1PCS 1389002 Sleeve 1PCS 1389003 ceramic cartridge 1PCS 1389004 Bonnet nut 1PCS 1389005 Escutcheon 1PCS 1389006 Nipple 1PCS 1389007 O-ring 1PCS 1389008 Washer 1PCS 1389009 Spout 1PCS 1389010 Escutcheon 1PCS 1389011 Handle(Lever) 1PCS 1389012 Set screw 1PCS 1389013 Screw cover 1PCS 1389014 Allen wrench 1PCS
1. BEFORE PROCEEDING WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a professional if you are uncertain about installing this product!, this product should be installed in accordance with all local and state plumbing and building codes. 2. SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter.
4. VALVE TRIM SET INSTALLATION 4.1 Apply Teflon tape on the thread of nipple and then connect to rough-in valve. 4.2 Make a mounting rack (normally use woods as materials) for preparing install the rough-in valve. The mounting rack’s face should be 53mm (2-1/16”) at least and 65mm (2-9/16”) behind the finish wall surface.
4.
4.4 Turn on your shut-off valve for cleaning the hot and cold water supply tube before connect to the valve trim, allow the water flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after finish. 4.5 Apply Teflon tape on the thread of supply tube outlet and then connect to rough-in valve with elbow.
4.6 Install the finished wall. 4.7 Remove the plastic sleeve and secure the escutcheon wall and seal the wall around the plaster shield with waterproof sealant WARNING: Failure to seal the wall can lead to possible water damage.
4.8 Secure the spout to nipple with set screw by Allen key.
4.9 Place handle onto the valve stem and tighten set screws by using the Allen wrench that is provided. (Please don’t over tighten), Then attach the screw cover onto handle.
5. INSPECTION 5.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere. 6. FUNCTION INSPECTION 6.1 Turn on the handle, the water outflow from the spout and then turn off the handle, the water stop out flowing. 6.2 Turn right the handle, the cold water coming, on the contrary way, turn left the handle, hot water coming.
Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
Symptom Solution A. B. A. B. The water pressure is too low C. A. The spout sprays water all over B. A. Water is leaking from the faucet under the sink B.