MODEL: S1303XW Version: 1.
Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
VERSION: 140320.15.3 This product has been manufactured and tested to the highest quality standards by SUMERAIN sanitary Inc("SUMERAIN").This warranty is limited to SUMERAIN products which are purchased by a consumer in the China after Jan 1,2010 and installed in China or the state which has SUMERAIN technical support department locally.(visit http://www.sumerain.com/en/supportcenter.asp for review the state list of SUMERAIN technical support department).
Function Bathtub Faucets Feature Waterfall Style Contemporary Finish Brushed Nickel Installation Holes Five Holes Number of Handles Three knobs Spout total Height 6-11/16’’ Spout Reach 3-15/16’’ Spout Width 1-9/16’’ Spout Height 3-3/4’’ Max deck thickness 1-1/2’’ Valve Type Ceramic Disc Valve Valve Body Material Brass Spout Material Stainless steel Hand shower Material Brass Spout Net Weight 1.40KG [ -lbs ] Gross Weight 1.60KG [lbs ] Working water press 0.2 ~0.
SIDE VIEW OF SPOUT
1. BEFORE PROCEEDING WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a Professional,if you are uncertain about installing this product!, this product should be installed in accordance with all local and state plumbing and building codes. 2. SHUT OFF WATER SUPPLY Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter.
4. INSTALLATION HOLES INSPECTION Verify that the hole sizes and positions in the wall are correct,the diameter of mounting hole recommend 32mm(1-1/4”) 5. INSTALLATION 5.1 Turn on your shut-off valve for cleaning the hot and cold water supply pipe before connect to the faucet, allow the water flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after done.
5.2 Attach the shank to the bottom of your faucet. 5.3 Through the hot and cold flexible hose and purified hose over the hole of mounting surface from under, screw in the faucet bottom’s cold and hot water inlet ,purified water inlet separately by hand(rotate widdershins).
5.
5.7 Attach the hot and cold water hose from the faucet to each of the hot and cold supply valve, tighten the mounting nut by hand or wrench. 6. INSPECTION 6.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere.
Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.