Instructions / Assembly

Easy Set-up Bike Camping Tent
7ft x 4.5ft x 45in (2.13m x 1.37m x 1.14m)
If any quality problems, feel free to contact us via:
[e-mail]
45in
---
---
-------------------------------
---
---
------------------------------------
6.0ft
---
---
---
---------------------------
---------------------
4.0ft
4.5ft
Parts list:
A(1) Backpack
B(1) Rainfly
C(1) Tent body
D(2) Black Aluminum
poles
E(2) Golden Aluminum
poles
F(12) Ground stakes
A
B
C
D
E
F
THIS RECREATIONAL PRODUCT REQUIRES TWO PEOPLE TO ASSEMBLE.
THIS RECREATIONAL ITEM IS NOT INTENDED FOR USE AS A PERMANENT
STRUCTURE.
This product has been developed and is intended to provide protection from sun and light
rain. DO NOT use any gas or flame sources under or near this product. This product is
NOT WATERPROOF. Excess water build-up can cause the frame system to become
unstable, and collapse, causing injury. Any personal accessories or modifications to
product should be removed before the onset of inclement weather such as heavy rain,
wind, lightning, hail, snow, etc. When hitting golf balls, make sure no humans, animals and
properties are behind/close to the tent; do not try full power hitting the balls (not over 120
mph?).This product should be completely dismantled to avoid permanent damage to
product components and avoid any possibility of personal injury. This product is not a toy.
This product is not designed for use by children without adult supervision. Under no
circumstances should this product be used as a permanent or temporary storage facility for
children's toys, garden tools, personal belongings or similar valuables. Consumer-made
modifications for extended use, ie. permanently securing to decks and patios and/or
Consumer's failure to follow stated guidelines, will invalidate any UNIPROS Limited
warranty, expressed or implied.
This product is made of flame-resistant fabric. It is not fireproof. The fabric will burn if left in
continuous contact with a flame source.
WARNING: KEEP ALL FLAME AND HEAT
SOURCES AWAY FROM THIS PRODUCT FABRIC.
How to Assemble the Bicycle Camping Tent.
(1) Lightweight backpack for easy carrying.
(2) Take out all the parts from the backpack and place on the ground for
setting up.
(3) Unfold the tent body.Insert the ground stakes to sturdy the corner of the
tent.
(4) Connect the aluminum poles.
Put the aluminum pole in the
tent sleeve (orange) .
(5) Cross the two aluminum poles
and tie up.Attach J-hook of the
tent to the poles to set up the tent.
(6) Set up the partially camping tent and insert ground stakes to flat the bike
parking spot.
(10) Withdraw guylines and
attach to the ground
stakes to enhance and
sturdy the whole tent.
Complete the whole
set up of the bicycle
tent.
(7) Cover rainfly on the tent.Attach the rainfly to the tent by using hook&loop.
Attach the nylon fastners to the ground stakes to secure the rainfly.
(8) Attach black poles to the black rubber inlet on the roof tent. Insert black
poles to the o-ring inlet on the bottom of the tent.Set two black poles to
build the bike tent.
(9) Use fasteners to strap the bicycle tyre on the pole.