Installation Guide

subzero.com | 3
Product Information
Important product information, including the model and
serial number, are listed on the product rating plate. The
rating plate is located at the top frame of the unit, inside the
door. Refer to the illustration below.
If service is necessary, contact Sub-Zero Factory Certied
Service with the model and serial number. For the name
of the nearest Sub-Zero Factory Certied Service or for
questions regarding the installation, visit the Support
and Service section of our website, subzero.com, or call
Sub-Zero Customer Care at 800-222-7820.
Tools and Materials
• Screwdrivers—standard and Phillips.
• Power drill.
• Drill bits (masonry bits required for concrete installation).
• Torx drives—T-10, 15, and 20.
• Standard Allen wrench set.
• Standard socket and wrench set.
• 2' and 4' levels.
• Tubing cutter.
• 3' of
1
/4" OD copper, braided stainless steel, or PEX
tubing.
• Saddle valve.
• Material to protect home, ooring, and cabinetry during
installation.
Rating plate location
RATING
PLATE
CLASSIC REFRIGERATION