Design Guide

subzero.com | 99
Undercounter Ice Maker
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local
dealer information, visit the find a showroom section of
our website, subzero.com. Refer to the chart below for
standard handle lengths.
HANDLE LENGTH TUBULAR PRO
Ice Maker 24⁄" (616) 22⁄" (572)
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
Stainless Steel Panel
A stainless steel panel and handle is available through
an authorized Sub-Zero dealer. For local dealer informa-
tion, visit the find a showroom section of our website,
subzero.com.
The depth of each model is 23"
(584). Allow for panel thick-
ness when planning the finished opening depth.
Custom Panel
A door panel and handle must be provided. Refer to the
charts below for panel requirements and dimensions.
The panel cannot exceed the maximum panel weight
indicated in the chart below. The depth of each model
is 23"
(584). Allow for panel thickness when planning the
finished opening depth.
CAUTION
As reveals between cabinetry and the unit decrease,
severe finger pinching can occur while the door is
closing.
Finish all sides of the custom panel. They may be visible
when the door is open. A D-style handle is recommended.
Locate the door handle near the edge of the panel oppo-
site the hinge and centered top to bottom.
PANEL REQUIREMENTS
Panel Weight 15 lb (7 kg) max
Panel Thickness ⁄" (16) min–⁄" (19) max
PANEL DIMENSIONS
W H
Ice Maker 15" (381) 30⁄" (772)