007528568/319988379/611768150922/23WM40509-PT01 1007529293/319988482/611768150670/23WM40509-PW72 USE AND CARE GUIDE FALLSTON ELECTRIC FIREPLACE WALL MANTEL Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this Electric Fireplace.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/assembling the fireplace.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA BB CC DD EE FF GG HH II Part Description Part Number Quantity AA Bolt 6.3 x 25 mm P23WM40509-AA 22 BB 19 mm Flat Washer PH-WSRBLK001 22 CC Screw 3 x 12 mm PH-SCRBLK007 2 DD Screw 3.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. G F C J I B H E K D A Part Description Quantity A Base 1 B Left Side Panel 1 C Right Side Panel 1 D Left Surround Panel 1 E Right Surround Panel 1 F Top Surround Panel 1 G Top Panel 1 H Left Decorative Surround Panel 1 I Right Decorative Surround Panel 1 J Top Decorative Surround Panel 1 K Fireplace Insert 1 7 HomeDepot.
Assembly 1 Attaching the surround panels to the side panels Locate the Left and Right Side Panels (B and C) and the Left and Right Surround Panels (D and E). BB AA Place the Left Surround Panel (D) one the inside edge of the Left Side Panel (B) as shown in the diagram. Aligning the pre-drilled holes in both panels, insert Bolts (AA) through Flat Washers (BB) and into the predrilled holes.
Assembly (continued) 3 Assembling the fireplace surround Locate the Top Surround Panel (F). Insert the pre-installed wooden dowels on the left and right surround panels into the bottom edge of the Top Surround Panel (F) as shown. F Once the Top Surround Panel (F) is in place, rotate the pre-attached metal brackets to span the joint of the top surround rail and each side surround rail. Secure each bracket with a Screw (CC).
Assembly (continued) 5 Attaching the top panel Place the Top Panel (G) on top of the main assembly while aligning the pre-installed screws with the screw holes. After inserting the screws into the holes, tighten the fasteners from underneath the Top Panel (G) using a Phillips Screwdriver. G 6 Attaching the decorative side panels Locate the Left and Right Decorative Surround Panels (H and I). The Decorative Surround Panels are reversible.
Assembly (continued) 7 Attaching the decorative top panel Locate the Top Decorative Surround Panel (J). Align the pre-installed dowels between the Top Decorative Surround Panel (J) and Decorative Surround Panels (H and I). Be sure that the design of your choice is facing out toward the front of the unit, matching the side panels installed in step 6. Insert Bolts (AA) through Flat Washers (BB) and into the pre-drilled holes.
Assembly (continued) 9 Installing the fireplace insert Lift the Fireplace Insert (K) carefully into the back of the unit and center in the fireplace insert opening. Do not drag the Fireplace Insert (K) across the base as it may scratch your unit. K 10 Securing the fireplace insert Align the Metal Brackets (EE) behind the Fireplace Insert (K) and over the edge of the bottom panel. Secure each bracket with the Mounting Screws (DD) on both sides. K EE DD 12 HomeDepot.
Assembly (continued) 11 Installing the tip restraint hardware When the Tipping Restraint Hardware (FF) is properly installed, it can provide protection against unexpected tipping of the unit due to small tremors, bumps or climbing. Wall Each Tipping Restraint Hardware (FF) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to the left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the flame There are 5 unique 3D flame colors that can be selected.
Operation (continued) 5 Adjust the fan speed 6 Fan oscillation Press the Fan button in succession to cycle through the speed settings; 1 (lowest speed) 2 (middle speed) 3 (highest speed) and 0 (OFF). Pressing this button will turn on or off the oscillation feature. When on, the louvers will oscillate back and forth to distribute the air flow to a wider area.
Operation (continued) 9 Power cord information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 10 Patented Safer Plug® information This product is equipped with a Safer Plug®, which is an advanced safety device that helps detect electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM Fireplace stopped heating before reached desired temperature. ROOT CAUSE CORRECTIVE ACTION Fireplace has reached set temperature. Temperature around fireplace might be a few degrees higher than other area in the room. Set the fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting (continued) PROBLEM Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed. ROOT CAUSE CORRECTIVE ACTION The heater is disabled. With the power on press and hold the Power button on the control panel for 10 seconds. Once re-enabled the emberbed lights will flash multiple times. There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
