ITEM #1599742 3-TIER OVER-THE-TOILET SHELF TOWER Style Selections is a trademark of LF, LLC. All Rights Reserved. MODEL #8865GYMV Español p. 8 ATTACH YOUR RECEIPT HERE ADJUNTE SU RECIBO AQUÍ Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday.
TABLE OF CONTENTS Package Contents .......................................................................................................................... 2 Hardware Contents ........................................................................................................................ 3 Safety Information ........................................................................................................................... 3 Preparation ......................................................
HARDWARE CONTENTS (shown actual size) AA BB CC DD Tube Cap Qty. 8 EE Screw Wood Screw Qty. 8 Qty. 12 FF GG Spacer Qty. 1 HH Small Screw Qty. 2 Wall Anchor Mounting Screw Allen Wrench Qty. 4 Qty. 2 Qty. 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing and gas lines.
ASSEMBLY INSTRUCTIONS 1. Insert the tube caps (AA) into the top side panels (A), as shown. 1 Hardware Used AA Tube Cap A x4 A AA 2. F asten the straight tubes (C) to a side panel (A) with screws (BB), as shown. 2 Hardware Used BB BB Screw A C x3 C C bottom screw hole faces in 3. F asten the fixed shelves (B) to the side panel (A) with wood screws (CC), as shown.
ASSEMBLY INSTRUCTIONS 4. F asten the other side panel (A) with screws (BB) and wood screws (CC), as shown. 4 CC Hardware Used BB BB Screw x3 CC Wood Screw x6 A BB DD Allen Wrench x1 CC bottom screw hole faces in 5. Insert the tube caps (AA) into the bottom side panels (D), as shown. Hardware Used AA Tube Cap x4 wall mounting hole 5 bottom screw hole faces in D D AA 6. F asten the bottom side panels (D) to the top side panels (A) with small screws (HH), as shown.
ASSEMBLY INSTRUCTIONS 7. Place the assembly in the desired location and mark the mounting points on wall through the holes in the back tubes of the unit. 7 NOTE: Wall anchors (GG) should be oriented with the flat side horizontal. Hammer the wall anchors (GG) into wall, unless mounting screws (EE) will go directly into a stud. FF GG EE Insert the mounting screws (EE) through the holes in the back tubes and the spacers (FF) of the unit.
CARE AND MAINTENANCE Cleaning with a dry cloth may be sufficient, but for other stains or marks wipe gently with a damp cloth. DO NOT use strong detergents or abrasive cleaners; they may damage the surface of the product. REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday.
ARTÍCULO #1599742 REPISA VERTICAL PARA COLOCAR SOBRE EL INODORO Style Selections es una marca registrada de LF, DE 3 NIVELES LLC. Todos los derechos reservados. MODELO #8865GYMV Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-877-888-8225, de lunes a domingo de 8 a.m. a 8 p.m., hora estándar del Este.
ÍNDICE Contenido del paquete ................................................................................................................... 9 Aditamentos ..................................................................................................................................10 Información de seguridad ............................................................................................................. 10 Preparación ......................................................................
ADITAMENTOS (se muestran en tamaño real) AA BB CC DD Tapa de tubo Cant. 8 EE Tornillo Tornillo para madera Cant. 8 Cant. 12 FF Llave Allen Cant. 1 GG Espaciador HH Tornillo pequeño Cant. 2 Cant. 4 Ancla de expansión de pared Tornillo de montaje Cant. 2 Cant. 2 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto.
INSTRUCCIONES DE ENSAMBLAJE 1. I nserte las tapas de tubo (AA) en los paneles laterales superiores (A), como se muestra. 1 Aditamentos utilizados AA Tapa de tubo A x4 A AA 2. F ije los tubos rectos (C) a un panel lateral (A) con tornillos (BB), como se muestra. 2 A BB Aditamentos utilizados BB Tornillo C C x3 C orificio inferior para tornillo orientación interior 3. Fije los estantes fijos (B) al panel lateral (A) con tornillos para madera (CC), como se muestra.
INSTRUCCIONES DE ENSAMBLAJE 4. Fije el otro panel lateral (A) con tornillos (BB) y tornillos para madera (CC), como se muestra. 4 CC BB Aditamentos utilizados BB Tornillo x3 CC Tornillo para madera x6 DD Llave Allen x1 5. Inserte las tapas de tubo (AA) en los paneles laterales inferiores (D), como se muestra.
INSTRUCCIONES DE ENSAMBLAJE 7. Coloque el ensamble en el lugar deseado y marque los puntos de montaje en la pared a través de los orificios en los tubos posteriores de la unidad. 7 NOTA: las anclas de expansión de pared (GG) deben estar orientadas con el lado plano en posición horizontal. FF Use un martillo para colocar las anclas de expansión (GG) en la pared, a menos que los tornillos de montaje (EE) vayan directamente en una viga.
CUIDADO Y MANTENIMIENTO La limpieza con un paño seco puede ser suficiente. Sin embargo, para otras manchas o marcas limpie suavemente con un paño húmedo. NO utilice detergentes fuertes ni limpiadores abrasivos, ya que pueden dañar la superficie del producto. LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-877-888-8225, de lunes a domingo de 8 a.m. a 8 p.m., hora estándar del Este.