Product Manual

FAN USE AND CARE

 Check for damaged parts before each use. Carefully check that the tool will operate properly and

perform its intended function. Replace damaged or worn parts immediately. Never operate the

tool with a damaged part.

 Do not use a tool with a malfunctioning switch. Any power tool that cannot be controlled with the

power switch is dangerous and must be repaired by an authorized service representative before

using.

 Disconnect the air supply from the tool and place the switch in the locked or off position before

making any adjustments, changing accessories, or storing the tool. Such preventive safety

measures reduce the risk of starting the tool accidentally.

 Store the tool when it is not in use. Store it in a dry, secure place out of the reach of children.

Inspect the tool for good working condition prior to storage and before re-use.

 Use only accessories that are recommended by the manufacturer for use with your tool.

Accessories that may be suitable for one tool may create a risk of injury when used with another

tool. Never use an accessory that has a lower operating speed or operating pressure than the tool

itself.

 Keep guards in place and in working order. Never operate the tool without the guards in place.

 Do not leave the fan running unattended.

 Inspect the fan for damage or excessive wear before each use. If you find damage do not use the

tool.

Specific Operation Warnings

 Be sure that both front and rear grille screws are completely tightened before operation

Safety Labels

Assembly

No assembly necessary.