Product Manual

Page 8 of 12
2) To stabilize the canopy, unroll the guy rope on the corner of the canopy. Tie the other end to the
stake, and then drive the stake into the ground to secure it. (Adjust the stake position to tighten up
the guy rope.) Repeat for each guy rope.
After Each Use
⚠WARNING
 Read and understand all instructions. Failure to follow all instructions listed below may result in
serious injury.
Disassembling the Canopy
Store all parts, such as the stakes, in the corresponding bags to prevent possible tearing or damage
to the fabric.
Step 1：Remove the stakes.
1) Carefully remove the stakes by pulling out the hook ends.
2) Remove any excess soil from the stakes and store them in their bag.
Step 2: Take down the canopy.
1) Remove any accessories if installed. Fold for storage.
2) Pull the pull-pin located in the middle of each leg, and carefully lower each leg, making sure each
leg is level before proceeding. Repeat until the frame is lowered to the ground.
3) Remember the fasteners are inside the roofline on side scissors bars and at corners. Detach all
fasteners and remove the fabric top completely off the frame and fold for storing.
⚠CAUTION
Never store fabric on the frame. You may damage the fabric, frame, or both.