Product Manual

Page 8 of 11
Maintenance
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from
oil and grease. The following chart is based on a normal operation schedule.
Maintenance Interval
Maintenance Point
Daily before operating
It is recommended that the general condition of the dolly be
examined before it is used.
After use
Keep the dolly clean. A properly maintained dolly will work
more effectively. Keep all of the parts dry, clean and free from
oil and grease.
Cleaning. Use only soap and a damp cloth to clean your dolly.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Wheels will not roll
smoothly.
Screws are loose.
Check all the screws and tighten if needed.
Wheel inner bearings are dirty or rusted.
Apply oil to inner bearings if needed.