Product Manual

Page 10 of 16
1. Insert the axle shaft through the hole in the frame. Align the holes in the axle and frame. Secure
the screws and washers, as shown below.
2. Slide in each wheel over the end of each axle shaft and secure with hex bolts and washers.
3. Tighten all connections securely.
Locking Wheel Installation for Model 79031
Locking Wheel Installation for Model #79031
1. Attach the locking wheel component (2) to the frame.
2. Place the washer on the hex bolt.
3. Insert the bolt through the opening on the locking wheel component.
4. Tighten the nuts firmly to secure the wheel component.
Before Each Use
⚠WARNING
• Before using, be sure the fan does not have any damaged parts.
Place fan on a flat, stable surface.