Mobile Drum Carrier Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This drum carrier is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use As the ideal drum handling equipment, the Strongway Mobile Drum Carrier can help you lift, transport, and pour drums and barrels, as well as move drums on and off pallets. The hoop structure works for handling any rimmed steel, fiber, or plastic drum. With a locking handle, the drum is locked and can be easily poured or positioned horizontally or vertically. By releasing the locking handle, the drum can be rotated in order to stir content. It fits drums with a diameter of 22.4– 23.6 inches.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product.
Specific Operation Warnings ⚠WARNING Do not exceed the rated load capacity. Use on a flat, hard, level surface. Main Parts of Product Reference 1 2 3 4 5 Subassembly Base Assembly Pole Handle Assembly Drum Hoop Casters Assembly Instructions 1. Assemble the casters onto the base.
2. Assemble the pole onto the base. 3. Assemble the handle and air spring onto the poles.
4. Assemble the drum hoop onto the handle.
1. Place the drum on the ground and move the carrier as close as possible to the drum (with the two parts of the drum hoop open). 2. Close the two parts of the drum hoop to clasp the drum, and lock the two parts with the two locks on the hoop. If the drum cannot be held tightly, adjust the two bolts on the locks. 3.
6. Release the handle, the drum will stop at that height and you can transport it. Maintenance Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair. Keep handles dry, clean, and free from oil and grease. The following chart is based on a normal operation schedule.
Parts Diagram Parts List Reference 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Description Base assembly Left pole Right pole Handle assembly Drum hoop Bolt M10 x 80 Washer Φ10 Nut M10 Nut M8 Bolt M12 x 70 Nut M12 Washer Φ12 Nut M12 Quantity 1 1 1 1 1 4 8 4 1 2 2 6 2 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.