Product Manual

Page 5 of 12
PERSONAL SAFETY
 Stay alert, watch what you are doing, and use common sense when operating the mover. Do not
use the mover while you are tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool may result in serious personal injury.
 Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
 Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant
safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust
mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection
systems, and hearing protection when appropriate. This applies to all persons in the work area.
 Do not overreach. Keep proper footing and balance at all times.
 Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.
⚠CAUTION
MOVER USE AND CARE
 Do not force the mover. Products do a better job and are safer when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.
 Check for damaged parts before each use. Carefully check that the mover will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
mover with a damaged part.
 Store the mover when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the mover for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your mover.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
 Keep guards in place and in working order. Never operate the mover without the guards in place.
Specific Operation Warnings
⚠WARNING
 Study, understand, and follow all instructions before operating this device.
 Do not exceed the rated capacity.
 Use only on hard, level surfaces.
 When loading the cargo, load at a vertical angle to prevent a rollover.
 Before moving, lower the load to the lowest possible point.
 Before moving the load, be sure the load is centered and secured with a load restraining device.
 Do not alter the mover.
 Failure to follow these warnings may result in personal injury and/or property damage.