60 Watt Industrial LED Low Bay Light Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a Strongway™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This light is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operation Warnings .......................
Intended Use The Strongway 60 Watt Industrial LED Low Bay Light is a high-performance, heavy-industrial, LED solution designed for unforgiving climates and demanding areas. It’s suitable for the most rugged areas from wet locations to high ambient conditions. Common applications include manufacturing, machining, foundries, natatoriums, gymnasiums, cold storage, and the automotive industry.
⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Wear the proper personal protective equipment when necessary. Use ANSIZ87.1 compliant safety goggles (not safety glasses) with side shields, or when needed, a face shield.
Disconnect the light and allow cooling prior to servicing. Check that voltage is compatible with the light driver. Use approved connectors for all electrical connections. Maintain proper ventilation and heat dissipation within a 17 foot area around the light.
Ceiling Mounting 1. 2. 3. 4. 5. Decide on the location of the installation. Mount the ceiling ring and attach the ring to one of the loops of the chain. Attach the light to the other loop of the chain. Use the two buckles to attach the safety rope to the ceiling ring and the light. Connect the wires. Wiring ⚠WARNING Make sure the power is off before wiring. Wear insulating gloves. 1. Find the live wire, the neutral wire, and the ground wire in the junction box. 2.
Operation Instructions This product does not have or include a switch. Once it’s well wired and the circuit is in the ON state, it will be controlled by a home switch. Before Using For the First Time ⚠WARNING Make sure the supply voltage is the same as the rated light voltage. Check for damaged parts and damaged wires. Maintenance ⚠WARNING To avoid personal injury, disconnect the power to the light and allow the unit to cool down before performing maintenance.
Parts Diagram Page 9 of 12
Parts List Part Number 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Description Hook Rings Screw Driver Box and Driver Heat Sink Power Cord PCB Board Connector Screw Lens Screw Reflector Screw Quantity 1 1 1 1 1 2 1 1 4 1 4 1 4 Remark M4*20 M3*4 M4*12 M3*4 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Strongway product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of five years from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
