Product Manual A

Page 6 of 12
the tool itself.
 Keep guards in place and in working order. Never operate the product without the guards in place.
 Do not leave the tool running unattended.
Specific Operation Warnings
⚠WARNING
 Risk of finger entrapment and laceration.
 Wear ANSI Z87.1 compliant protective goggles and equipment.
 Before use, fully deflate the tire.
 Ensure the wheel is stable and the work area if free and clear of debris.
 Secure and fully support any vehicles.
Assembly Instructions
⚠WARNING
 Always deflate tires before disassembling.
 Use the proper tools.
 Always be aware of the risk that there are always crushing hazards
 Lock the safety rods on the vehicle.
 The safety valve is set and sealed by the manufacturer. Do not tamper with it or change its
calibration.
 Follow all instructions to avoid injury to people or damages to objects and surroundings.
Connect the hydraulic pump (manual or air) to the bead breaker with the quick-couplers. If you use
the air/hydraulic pump, you must connect it to a source of compressed air of 100-120 psi.
Test the bead breaker before you attach it to the rim. Release all air from the tire, remove the cap and
valve, and the valve extension. Verify that the tire is completely deflated!
Before Each Use
⚠WARNING
 Before the bead breaker is used, carefully inspect the unit each time for damages, or any missing,
worn, or loose parts.
 Explosion hazard. Deflate tire before removing a wheel, rim, or part of a rim clamp or nut.