Product Manual

Page 8 of 12
After Each Use
Disassembly
Store all parts, such as stakes, in their individual bags to prevent possible tearing or damage to the
canopy fabric.
Step 1: Remove the stakes.
1) Carefully remove stakes by pulling out the hook ends.
2) Remove excess soil from the stakes and store them in the stake bag.
Step 2: Take down the canopy.
1) Remove all accessories. Fold for storage.
2) Pull the RED pull-pin located in the middle of each leg, and carefully lower each leg, making sure
each leg is level before proceeding. Repeat until the frame is lowered to the ground.
3) Remember, the fasteners are inside the roofline, on side scissors bars and at corners. Detach all
fasteners and remove the fabric top completely off the frame and fold for storing.
⚠CAUTION
Never store fabric on the frame. You may damage the fabric, frame, or both.
4) Pull the RED pull-pin, found on each leg at each upper corner of the frame, making sure that all
sides are detached from the snap button. Slowly slide the roof line downward while walking in.
This will collapse the frame completely.
Step 3: Store all contents in the carrying bag.
1) To prolong the life of your canopy, you will need to store it correctly. Place the folded frame ‘feet
first’ toward the carrying bag wheels.
2) Return the stakes to their stake bag and place alongside the frame.
3) Lastly, place the folded fabric into the carrying bag, making sure all pieces are completely tucked
inside the bag. Carefully zip the bag shut.
Note: After packing the bag, double check the contents and surrounding area for any missing parts.