Product Manual

Page 9 of 14
5. Hook the chain (#8) to the lock catch (#5) from behind the frame dragging bar (#2).
6. Connect the skidding arch to your ATV with the coupler (#7) provided.
Before Each Use
⚠WARNING
• Do not modify the skidding arch in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the equipment. There are specific applications for which
the skidding arch was designed.
 It is important to maintain the 35 PSI in the pneumatic tires at all times. Do not over-inflate or
under-inflate your tires. Low pressure may result in tire failure. Over inflation may cause the tire to
burst or the rim to separate causing serious personal injury.
 Always inflate tires from a regulated air source with an available pressure gauge. Inflating your
tires from an unregulated air source could over-inflate them, resulting in a burst tire, rim
separation, and/or personal injury.
 Review all safety information and instructions below. Failure to follow these instructions may
result in property damage or injury to the operator or bystanders.
 Check for damaged or worn parts before using the skidding arch. Broken parts will affect the
skidding arch operation. Replace or repair damaged or worn parts immediately.
 Check and make sure all the bolts and nuts have been secured.
 Check the pressure of your tires and make sure they are 35 PSI. Inflate the tires if necessary but
NEVER over-inflate them!
Operating Instructions
⚠WARNING
 Wear ANSI Z87.1 compliant safety goggles.
 Do not exceed the rated load capacity and rated log dimensions.
 Wear steel toed boots and heavy duty leather gloves while handling logs.