Product Manual

8
5. When the saddle reaches its lowest resting position, with a flat blade screwdriver, push the oil fill plug slightly to
the side to purge trapped air from system. (Use caution not to tear or puncture the oil plug.)
6. Replace the cover plate (45).
7. Jack is now ready for use. Check for proper pump action.
BEFORE USE
WARNING: Improper use of this jack may result in serious injury or death.
1. Before using this product, read the owner's manual completely and familiarize yourself thoroughly with the
product and the hazards associated with its improper use.
2. Perform the air purge procedure. (See previous instructions for system purge procedure.)
3. Check and that the pump operates smoothly before putting into service.
4. Inspect before each use. Do not use if bent, broken or cracked components are noted.
RAISING THE JACK
1. Block the vehicle’s wheels for lifting stability. Secure the load to prevent inadvertent shifting and movement.
2. Position the jack near desired lift point.
3. Refer to the vehicle manufacturer owner’s manual to locate approved lifting points on the vehicle. Position the
jack so that the saddle is centered and will contact the load lifting point firmly.
4. Assemble the handle, ensuring that it aligns with slots.