Product Manual

2
Thank you very much for choosing a Strongway product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
Screw jacks lift and precisely position a variety of loads. Upright or inverted, these jacks operate at
full capacity in tension or compression. Mechanical jacks offer increased precision and travel speed
required to level or lift loads needing rigorous detail or load stabilization. Use this jack on house
leveling, bridge stabilization, machinery, oil field maintenance or steel fabrication and construction.
Can also be used as an external locking device to hold position. Multi-axis, cleated saddle positions
accommodate and assist in leveling the load. This product is tested for reliability and safety to meet
ASME B30.1 Standards.
TECHNICAL SPECIFICATIONS
Item
Capacity
Bar Hole
Size
Min.
Height
Lifting
Range
Max.
Height
Net
Weight
46246
15 Ton
13/16 inch
14 inch
7-7/8 inch
21-7/8 inch
23.13 lbs.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this jack until they have read
this manual and have developed a thorough understanding of how the jack works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors that cannot be built into this
product, but must be supplied by the operator.