Product Manual

ASSEMBLY

All numbers in parenthesis () refer to the index

number from the parts breakdown.

BASE

1. Attach the four ball bearing caster wheels to the

4 respective legs of the jack bases making sure

to tighten the screw.

2. Connect the legs with hardware provided

(26,25,34,19); hand tighten

CYLINDER

3. Loosen the three bolts on the base. Position the

cylinder on the base of the stand and tighten the

three bolts.

4. Attach the two half-circle handles to the cylinder

with the 4 bolts and tighten them in place.

SADDLE

5. To insert the saddle in place before using please

refer to Picture below. Tighten all bolts and nuts.

Cylinder assembly

Base