Installation Guide

INSTALLATION INSTRUCTIONS
LEVEL DRILL SILICONE SEALANT
PENCIL
TAPE MEASURE
SCREWDRIVER DRILL BIT
W ALL-MOUNTED BASIN
SUGGESTED TOOLS
WARNING!
This product is fragile and can break, chip, or cause injure if handled recklessly.
Please consult with a professional when installing.
Before installing, read entire instructions. Observe all local building and safety codes.
We recommend consulting a professional if you are unfamiliar with this type of installation.
Streamline accepts no liability for any damages to the oor, walls, plumbing, or for personal
injury during installation
1
2
3
4
5
6
Using a pencil, mark holes on the
wall where you would like to
position the brackets. Please
ensure that they are xed on an
even level.
Assemble the faucet and drain
on the basin and connect the
faucet pipe and drain pipe
to the valve as per the
manufacturers instructions.
Drill holes where you have created
the markings.
Hang the basin on the wall,
ensuring that it is afxed to the
brackets and level.
Using a screwdriver, x the
brackets onto the wall.
Finally, apply silicone sealant
in between the wall and the top
of the basin in order to secure it.

Summary of content (2 pages)