Installation & Assembly

6. Take 1 hex bolt (Part #4) and take 1 washer
with a large diameter (Part #5) and put the
washer through the bolt. Here is how it should
look in your hand:
7. Screw the nut with the washer on top of the
metal bar but do not screw in fully. Leave room
to insert the clawfoot.
6. Take 1 washer (Part #8) and put it over the bolt
on the bathtub. Then take 1 nut (Part #3) and place
it over the washer, but do not tighten the bolt
completely. Repeat this step for the other bolt on the
bathtub.