Data Sheet
Features
•
User friendly IIS3DWB board
• Complete IIS3DWB pinout for a standard DIL 24 socket
• Fully compatible with STEVAL-MKI109V3 motherboard
• Double-sided adhesives included for easy mounting on equipment to be
measured
• RoHS and WEEE compliant
Description
The STEVAL-MKI208V1K evaluation board has an embedded IIS3DWB 3D
accelerometer and 3D gyroscope sensor, which is connected via cable to a simple
adapter board (STEVAL-MKIGIBV2) to render it compatible with STEVAL-MKI109V3
motherboards.
The sensor is soldered precisely in the center of the board and double-sided
adhesives are provided to allow users to conveniently mount the board on equipment
destined for vibration analysis. Alternatively, you can mount the board using the holes
located in each corner of the PCB.
The STEVAL-MKIGIBV2 can be plugged into a standard DIL 24 socket. The kit
provides the complete IIS3DWB pin-out and comes ready-to-use with the required
decoupling capacitors on the VDD power supply line.
The STEVAL-MKI109V3 motherboards feature a high performance 32-bit
microcontroller functioning as a bridge between the sensor and a PC running the free
Unico GUI graphical user interface or dedicated software routines for customized
applications.
Product summary
iNemo inertial module kit
based on IIS3DWB
STEVAL-
MKI208V1K
ultra-wide bandwidth,
low-noise 3-axis digital
accelerometer for
industrial applications
IIS3DWB
ST MEMS adapter
motherboard based on
STM32F401VE
compatible ST MEMS
adapters
STEVAL-
MKI109V3
Application
IoT for Smart
Things
iNemo inertial module kit based on IIS3DWB
STEVAL-MKI208V1K
Data brief
DB4012 - Rev 1 - December 2019
For further information contact your local STMicroelectronics sales of
fice.
www.st.com
Downloaded from Arrow.com.