Use and Care Manual

A. Back

1 piece

B. Seat x1; Wings x2; Transformer x1

Part List

LY & S Assembly Instructions

Power Recliner

IMPORTANT NOTE

Please read. Check for all parts and

read

each step carefully

before assembling. Remove parts from bag. Organize parts in

groups by function in designated area to prevent loss. Avoid

damage to parts by assembling on soft surface.

1/3

PAGE 1
LY & S Assembly Instructions Power Recliner IMPORTANT NOTE Please read. Check for all parts and read each step carefully before assembling. Remove parts from bag. Organize parts in groups by function in designated area to prevent loss. Avoid damage to parts by assembling on soft surface. Part List A. Back 1 piece B.
PAGE 2
LY & S Assembly Instructions Assembly Instructions STEP 1 STEP 2 Detach the transformer and wings from the back and bottom of the Seat (B). (See Figure 1.) Attach the Back (A) to the Seat (B). Ensure the latches fit well. (See Figure 2.) B Figure 1 Figure 2 STEP 3 STEP 4 Pass the headrest cable through the hole in the back of the seater (See Figure 3.) Connect the headrest cable to the power button control cable, and place them behind the flap.
PAGE 3
LY & S Assembly Instructions STEP 6 STEP 5 Attach the Wings to the Back (A). Ensure latches are secure. (See Figure 5.) Fasten the back flap to the bottom of the furniture. (See Figure 6.) Figure 5 Figure 6 IMPORTANT NOTE · To avoid any risk of suffocation to children or pets, dispose of all plastic bags immediately. · To ensure proper performance, occasionally check for loose screws and tighten as needed.