User Manual

Panel Controls and Terminals
UR22mkII Operation Manual 7
Software
Yamaha Steinberg USB Driver is a software program
that allows communication between the UR22mkII
and a computer. In Control Panel, you can configure
the basic settings for the audio driver (Windows) or
confirm the audio driver information (Mac).
NOTE
Installing the Yamaha Steinberg USB Driver is not necessary
when connecting the device to an iPad.
Windows
How to Open the Window
Use the following two methods.
• Select [Control Panel]  [Hardware and Sound] or
[Sounds, Speech, and Audio Devices]
 [Yamaha
Steinberg USB Driver].
• From the Cubase series menu, select [Devices]

[Device Setup...]
 [Yamaha Steinberg USB ASIO] 
[Control Panel].
How to Select Windows
Click the upper tabs to select the desired window.
Steinberg UR22mkII Window
This window is for selecting the sample rate and for
setting the loopback function.
1
Sample Rate
Lets you select the sample rate of the device.
Options: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
NOTE
The available sample rates may differ depending on the
particular DAW you're using.
2 Enable Loopback
Turns the loopback function on and off with check box.
Check the check box to set the loopback function on
and off.
NOTE
When using the loopback function, turn off the monitor
functions on your DAW software. If the loopback function is
on while you are monitoring input signals form the UR22mkII
via DAW software, it will cause loud noise. This is because an
infinite loop of the audio signal is generated between the
UR22mkII and the DAW software.
3 Mix
When Enable Loopback is set to on, select the input
signal to Mono or Stereo.
Options: Mono, Stereo
Mono: [MIC/LINE 1/2] inputs will be recorded as
mono.
Stereo: [MIC/LINE 1/2] inputs will be recorded as
stereo. The [MIC/LINE 1] input will be L-
channel. The [MIC/LINE 2] input will be R-
channel.
HINT
What is loopback?
Loopback is a convenient function for broadcasting
over the Internet. It mixes the input audio signals
(such as microphone and guitar) with the audio
signals playing back in the software in the computer
into two channels in the UR22mkII, and sends them
back to the computer.
UR22mkII
Background music
Deliver