USB AUDIO INTERFACE EN DE FR ES PT IT ZH JA
Contents Message from the Development Team..........................2 Panel Controls and Terminals ..............3 Front Panel ................................................... 3 Rear Panel .................................................... 4 Software........................................................ 6 Using the UR12.......................................9 Connection Examples ................................... 9 Configuring Audio Driver Settings on the DAW Software ..............................
Panel Controls and Terminals Panel Controls and Terminals Front Panel 1 [INPUT 1 GAIN] knob Adjusts the input signal level of the [MIC] jack. 2 [MIC] jack For connecting a microphone. 3 [PEAK] indicator Lights up when the input signal is 3dB below the clipping level. HINT Setting optimum recording levels Adjust the gain knobs so that the [PEAK] indicator flashes briefly at the loudest input volume. 4 [+48V] indicator Lights up when the [+48V] switch (phantom power) is turned on.
Panel Controls and Terminals Rear Panel 1 [5V DC] port For connecting a USB power adapter or USB mobile battery. Use a power supply when connecting the UR12 to a device that does not supply sufficient bus power, such as an iPad. (The UR12 does not include a USB power adapter or USB mobile battery.) NOTICE • Read the safety precautions for the USB power adapter or USB mobile battery that you use.
Panel Controls and Terminals 4 [LINE OUTPUT] jacks For connecting monitor speakers. Use RCA connectors (unbalanced) to connect to these jacks. 5 [+48V] switch Turns the phantom power (+48V) on/off. When you turn this switch on, phantom power will be supplied to the [MIC] jack. Phantom Power Precautions NOTICE Always turn the phantom power switch to [OFF] when it is not required. When using phantom power, observe the following to prevent noise and possible damage to UR12 or connected equipment.
Panel Controls and Terminals Software Yamaha Steinberg USB Driver is a software program that allows communication between the UR12 and a computer. In Control Panel, you can configure the basic settings for the audio driver (Windows) or confirm the audio driver information (Mac). NOTE Yamaha Steinberg USB Driver does not support use with the iPad.
Panel Controls and Terminals About Window About Window Indicates the version and copyright of the audio driver. Indicates the version and copyright of the audio driver. How to Select the Sample rate (Mac) Configuring the Yamaha Steinberg USB Driver (Mac) How to Open the Window You can select the sample rate in [Audio MIDI Setup] window. How to Open the Window Select [Applications] [Utilities] [Audio MIDI Setup]. • Select [System Preferences] [Yamaha Steinberg USB].
Panel Controls and Terminals How to Select the Buffer Size (Mac) You can select the buffer size in the settings window for each application (DAW software, etc.). How to Open the Window From the Cubase series menu, select [Devices] [Device Setup...]. NOTE The method for opening the settings window is different for each application. Click [Control Panel] in [Steinberg UR12] in the menu on the left side of the window. The window for selecting the buffer size appears.
Using the UR12 Using the UR12 Connection Examples CAUTION Make sure that you set all volume levels to minimum before connecting or disconnecting the external device. Otherwise, high-volume output may damage your hearing or the equipment. Connecting to a Computer Connecting to an iPad Microphone Guitar Headphones Front Panel Front Panel Rear Panel Rear Panel To [USB2.
Using the UR12 Configuring Audio Driver Settings on the DAW Software 7. Set the ASIO Driver for Windows and audio interface for Mac as follows. Windows This section provides examples of connecting the UR12 to a computer. Cubase Series Programs 1. Close your DAW software if it is running. Set the ASIO Driver settings to [Yamaha Steinberg USB ASIO]. Mac Set the UR12 to the appropriate audio interface settings. The audio driver settings are now complete. 2.
Using the UR12 4. Select UR12 ports for [Device Port] on both the Inputs and Outputs tabs. Inputs Tab 9. Select the input routing. When a microphone is connected to the [MIC] jack: Click on the track, and then click the track name on the left side of the project window. NOTE If the track name is not shown in the inspector, close the currently displayed section (initial setting is [Fader]). Track Track name Outputs Tab In the window that appears below, select [Mono-In 1]. 5.
Using the UR12 10. Click [●] to start the recording. Programs other than Cubase Series 1. Launch the DAW software. 2. Turn on (O) the [DIRECT MONITOR] switch on the front panel. 11. After finishing the recording, click [■] to stop recording. 3. Adjust the input signal level of the microphone or guitar with the [INPUT GAIN] knob on the device. If you have a microphone connected to the [MIC] jack, adjust the [INPUT 1 GAIN] knob.
Troubleshooting Troubleshooting Power does not turn on Has the Yamaha Steinberg USB Driver been installed properly? Refer to the Getting Started instructions to complete the Yamaha Steinberg USB Driver installation. Confirm whether or not a proper USB cable is being used. If the USB cable is broken or damaged, replace the USB cable with a new one. Make sure to use a USB cable no longer than 3 meters. Is the [POWER SOURCE] switch set properly? First, disconnect the USB cable (if used) from the computer.
Troubleshooting Unusual sound (noise, interruption, or distortion) Is the buffer size set too low? Increase the buffer size compared to the current settings; refer to the section “Configuring the Yamaha Steinberg USB Driver (Windows)” (page 6) or “Configuring the Yamaha Steinberg USB Driver (Mac)” (page 7) for instructions. Does your computer satisfy the system requirements? Confirm the system requirements. For the latest information, see the Steinberg Website below. http://www.steinberg.
75$ +0276 176276 +0276 176276 = F$8㨪 F$8? *+ < +0276 = F$W㨪 F$W? 0QTOKPCN +PRWV /+% +0276 '0%1&'4 &'%1&'4 61 .112 $#%- &+4'%6 /10+614 & # # & (41/ (41/ 2'#- # & & # )#+0 *# )#+0 *# 2'#- (41/ *+ < 8 .'8'. 61 61 = F$8? = O9 QJOU? 2*10'5 4 . .
Steinberg Web Site http://www.steinberg.net/ C.S.G.
