User Manual

368 Audio Plug-ins
Band 4 Gain (-20 to +24dB)
Sets the amount of cut/boost for the high band.
Band 4 Freq (200 to 20000Hz)
Sets the frequency of the high band.
Band 4 Q-Factor (0.5 to 10)
Controls the width or resonance of the high band.
Band 4 Filter mode
For the high band, you can select between three types of shelving filters, a Peak, and a Cut
filter. When Cut mode is selected, the Gain parameter is fixed. -Shelf I adds resonance in
the opposite gain direction slightly below the set frequency. -Shelf II adds resonance in the
gain direction at the set frequency. -Shelf III is a combination of Shelf I and II.
Output (-24 to +24dB)
This knob on the top right of the plug-in panel allows you to adjust the overall output level.
Auto Gain button
When this button is activated, the gain is automatically adjusted, keeping the output level
constant regardless of the EQ settings.
Related topics
Audio Plug-ins
Master Section
How do I add effects?
Presets
12.32 Steinberg Test Generator
This utility plug-in allows you to generate an audio signal, which can be recorded as an Audio
File. The resulting file can then be used for a number of purposes:
For testing the specifications of audio equipment.
For measurements of various kinds, such as calibrating tape recorders.
WaveLab 7