User Manual

332 Audio Plug-ins
Right-Click and drag up/down: Fine adjustment of value
Double Click: Directly edit value
Shift + Left-Click and drag up/down: Fine adjustment of value
Control + Left-Click (Windows), Cmd + Click (Mac): Set to default
For circular controls:
the default action is Circular mode, but if the Alt key is held, the action is Linear mode.
Additionally, for all controls (including faders and knobs, not just Touch Pads)
Control + Left-Click (Windows), Cmd + Click (Mac): Set to default
DeBuzzer screen controls
Sonnox Menu Options Button
Clicking this button brings down a menu of options and preferences. It allows choice
of:
the input/output meter clip light hold duration (permanent, 2s, 5s),
a default to 50Hz on start-up, and
the splash screen to view the version number and build date.
Input Level Meter
The Input Meter is designed to give exactly 1dB per LED for the top 18dB of dynamic
range, and 2dB per LED thereafter. This gives a clear and intuitive impression of the
working headroom.
Input Gain Trim Touch Pad (dB)
This allows you to adjust the input signal level by up to ±12dB.
Frequency Knob and Touch Pad (Hz)
The De-Buzzer has an active frequency range for the buzz fundamental of between
20Hz and 440Hz. In Auto mode, this knob sets the frequency from which the buzz
detection circuit will start to hunt for buzz components. In Freeze mode, this knob
sets the exact frequency of the buzz fundamental. The knob is graduated around the
circumference, and clicking on any labeled graduation will set the frequency to that
graduation. The frequency can be scrolled from the touch pad.
Fine Adjust Button
This button enables fine tuning of the buzz frequency control. The graduations around
the circumference of the frequency knob will re-draw to a finer scale, and scrolling
the touch pad will enable very quick fine tuning of a hunt frequency. Scrolling past an
end-stop will continue to scroll the frequency and the marked graduations will re-draw
appropriately. Fine Adjust Mode forces Freeze, so that the selected frequency can
be specified exactly, without the Auto circuitry hunting for a stronger fundamental. If
entering Fine Mode from Auto, the Freeze button will flash and the plug-in will revert to
Auto when Fine mode is exited.
WaveLab 7