User Manual

214 Control Window

A horizontal line indicates that the left channel is the same as the right, but with an

inverse phase.

A random but roughly elliptical shape indicates a well balanced stereo signal. If the

shape "leans" to the left, there is more energy in the left channel and vice versa (the

extreme case of this is if one side is muted, in which case the Phasescope will show a

straight line, angled 45 degrees to the other side).

A perfect circle indicates a sine wave on one channel, and the same sine wave shifted

by 90 degrees on the other.

Generally, the more you can see a "thread" shape, the more bass there is in the signal;

the more "spray-like" the display, the more high frequencies are in the signal.

Phase Correlation meter

At the bottom of the display, you will ﬁnd a Phase Correlation meter, which shows the same

information but in a different way:

The green line shows the current phase correlation, while the two red lines show the

recent peak minimum and maximum values, respectively (these are the default colors,

which you can change).

With a mono signal, the meter would show +1, indicating that both channels are per-

fectly in phase.

Similarly, -1 indicates that the two channels are the same, but one is inverted.

Generally, for a "good" mix, the meter should show a value between 0 and +1.

Unlike the main Phasescope, the Phase Correlation meter is also available in "Analyze audio

selection" mode, showing an average value for the selected range.

Changing settings

You can deﬁne display colors, peak hold time, and the resolution or number of samples to

display from the Functions > Settings... menu.

The Phasescope meter can be found in the Meters menu of the Audio Files and Audio Mon-

tage Workspaces. It can be used either as a ﬂoating window, or docked in the Workspace

or the Control Window.