User Manual

RESULT
The selected bus is used as default bus. The Main Mix is indicated by a speaker icon next to its
name.
RELATED LINKS
Inputs/Outputs Tab on page 30
Presets for Input and Output Busses
For input and output bus congurations, you can use different kinds of presets.
●
A number of standard bus congurations.
●
Automatically created presets tailored to your specic hardware conguration.
On startup, Cubase analyzes the physical inputs and outputs that are provided by your audio
hardware and creates a number of hardware-dependent presets.
●
Your own presets.
NOTE
You can create default presets for input and output bus congurations. If you create a new
empty project, these default presets are applied. To create default presets, save your preferred
input and output bus congurations under the name Default. If you have not dened default
presets, the last used input and output bus
conguration is applied when creating a new empty
project.
Saving a Bus Conguration Preset
You can save your own input and output bus conguration as presets.
PROCEDURE
1. Select Studio > Audio Connections.
2. Click the Inputs or Outputs tab, and set up your bus conguration.
3. Click Store.
4. In the Type in Preset Name dialog, enter a name.
5. Click OK.
RESULT
The preset is available in the Presets menu.
Deleting a Bus Conguration Preset
You can delete bus conguration presets that you no longer need.
PROCEDURE
1.
Select Studio > Audio Connections.
2.
Click the Inputs or Outputs tab, and from the Presets menu, select the preset that you want
to delete.
3.
Click Delete.
Audio Connections
Presets for Input and Output Busses
33
Cubase Artist 12