User Manual

Table Of Contents
The audio that is played back should now appear in the application running on computer 2,
and the input bus level meters should move.
RESULT
You have now veried that the digital connection works as it should. You can reverse this
procedure so that computer 2 plays back and computer 1 listens.
Activating VST System Link
You must activate VST System Link on all network computers to be able to work with VST
System Link.
PROCEDURE
1.
Select Transport > Project Synchronization Setup, and on the Sources tab, activate VST
System Link as the timecode source.
2.
Select Studio > Studio Setup.
3.
In the Devices list, select VST System Link.
4.
Use the ASIO Input and ASIO Output pop-up menus to dene which channel is the
networking channel that carries the VST System Link information.
NOTE
The networking signal is carried on only one bit of one channel. For an ADAT-based system
7 channels of 24-bit audio and 1 channel of 23-bit audio will be used for networking. You will
still have around 138 dB headroom on this channel.
VST System Link
Activating VST System Link
1011
Cubase Artist 12