User Manual

Export Audio Mixdown
File Format
Sets the encoder to a different resampling mode. This may give better results depending
on your settings. However, it does not allow you to select the Sample Rate.
4 Insert ID3 Tag
Includes ID3 Tag information in the exported file.
5 Edit ID3 Tag
Opens the ID3 Tag dialog that allows you to enter information about the file. This
information is embedded in the file and can be displayed by most MP3 playback
applications.
Windows Media Audio Files (Windows only)
The Windows Media Audio format by Microsoft Inc. uses advanced audio codecs and lossless
compression. WMA files can be decreased in size with no loss of audio quality. Furthermore,
WMA features the possibility of mixing down to 5.1 surround sound. The files have the extension
.wma.
●
Codec Settings
Opens the Windows Media Audio File Settings dialog.
Windows Media Audio File Settings - General
The General tab in the Windows Media Audio File Settings dialog allows you to specify sample
rate, bit rate, and channels for the encoded file.
1 Sample Rate
Allows you to set the sample rate to 44.100, 48.000, or 96.000 kHz. Set this to match the
sample rate of the source material or use the closest available value that is higher than the
actual value.
2 Bit Depth
Allows you to set the bit depth to 16 bit or 24 bit. Set this parameter to match the bit depth
of the source material or use the closest available value that is higher than the actual
value.
NOTE
Always keep in mind the intended use of the file. For publication on the Internet, you
might not want too high bit rates, for example.
3 Channels
This setting depends on the chosen output. You cannot change it manually.
4 Mode
931