User Manual

Table Of Contents
Logical Editor
Specifying actions
VST 3 Value Operation (Logical Editor only)
Allows you to perform common operations within the VST 3 value range (0.0 to 1.0)
instead of the standard MIDI value range (0-127), for finer adjustments.
NOTE
The Position and Length parameters are interpreted via the time base setting in the Bar Range/
Time Base column, with the exception of the Random setting, which uses the time base of the
affected events.
RELATED LINKS
Searching for Properties on page 862
Value 1 and Value 2 on page 860
Operation
The Operation allows you to determine what to do with the Action Target.
The options on this pop-up menu are different depending on the selected Action Target.
Add
Adds the value specified in the Parameter 1 column to the Action Target.
Subtract
Subtracts the value specified in the Parameter 1 column from the Action Target.
Multiply by
Multiplies the Action Target with the value specified in the Parameter 1 column.
Divide by
Divides the Action Target by the value specified in the Parameter 1 column.
Cubase Pro only:VST 3 Value Operation – Invert (Logical Editor only)
Inverts note expression data containing the specified VST 3 event parameter.
Round by
Rounds the Action Target value using the value specified in theParameter 1
column.
Set Random Values between
Sets the Action Target value to a random value within the range specified with
Parameter 1 and Parameter 2.
Set to fixed value
Sets the Action Target to the value specified in the Parameter 1 column.
Set Relative Random Values between
Adds a random value to the current Action Target value. The added random value
will be within the range specified with Parameter 1 and Parameter 2. Note that
these can be set to negative values.
Add Length (Logical Editor only)
This is only available if you set Action Target to Position. Furthermore, it is only
valid if the found events are notes. If you select Add Length, the length of each note
event is added to the Position value.
Transpose to Scale
This is only available if you set Action Target to Value 1, and if the filter conditions
are specifically set up to find notes (a Type = Note filter condition line has been
867