User Manual

MIDI Realtime Parameters and MIDI Effects
MIDI Modifiers
Range
Allows you to specify a pitch or velocity range and either force all notes to fit within
this range, or exclude all notes outside this range from playback.
HMT: Follow
Activate this button to apply Hermode tuning to the notes played on this track.
HMT: Use for Analysis
Activate this option to use the notes you played on this track to calculate retuning.
Setting up Random Variations
You can set up random variations for position, pitch, velocity, and length of MIDI events using
one or two random generators.
PROCEDURE
1. Select a MIDI or instrument track.
2. In the Inspector, open the MIDI Modifiers section.
3. Open the Random pop-up menu and select the note property you want to randomize.
4. Specify the limits of the randomization in the two number fields.
The values will vary between the left value and the right value. You cannot set the left
value higher than the right value.
5. Play back the track to hear the randomized events.
RESULT
The corresponding properties are randomized.
NOTE
Depending on the track content, certain changes might not be immediately noticeable or might
have no effect at all.
AFTER COMPLETING THIS TASK
Deactivate the random function by opening the Random pop-up menu and selecting OFF.
Setting up Ranges
You can filter out pitches or velocities that do not match a specified range, or force them to fit a
specified range.
PROCEDURE
1. Select a MIDI or instrument track.
2. In the Inspector, open the MIDI Modifiers section.
3. Open the Range pop-up menu and select a mode.
4. Set the minimum and maximum values with the two fields to the right.
NOTE
You can make independent settings for the two Range functions.
AFTER COMPLETING THIS TASK
To deactivate the function, open the Range pop-up menu and select OFF.
667