User Manual

Table Of Contents
Surround Sound(Cubase Pro only)
VST MultiPanner
To zoom out of the pan area, activate Overview Mode.
Speaker channel buttons
The speaker buttons around the pan area represent the output configuration. The
buttons allow you to solo, mute, and disable the corresponding channels.
NOTE
You cannot automate the soloing of output channels.
Output level meter
Shows the output level for all speaker channels. The numeric values above the
meters indicate the peak levels registered for the channels.
Left-Right Pan
Sets the position of the signal on the x-axis.
Rear-Front Pan
Sets the position of the signal on the y-axis.
Rotate Signal around Z-Axis
Rotates the sound source around its positioning handle. This option is only available
for stereo signals.
Orbit Center
Rotates the sound source including all input channels and the positioning handle
signal around the center of the room.
Click Counter Shot to rotate the sound source by exactly 180 degrees.
Radius
Sets the distance of the sound source from the center of the room when using Orbit
Center.
Center Distribution
Distributes part or all of the center signal to the left and right front speakers.
NOTE
If Front Divergence is set to 100 %, Center Distribution has no effect.
Front Divergence
Determines the attenuation curve that is used when positioning the sound source on
the front x-axis.
Front/Rear Divergence
Determines the attenuation curve that is used when positioning the sound source on
the y-axis.
Rear Divergence
Determines the attenuation curve that is used when positioning the sound source on
the rear x-axis.
Signal Width
Sets the expansion of the sound source on the x-axis. This parameter is only available
for channels with stereo or multi-channel output configurations.
Signal Depth
Sets the expansion of the sound source on the y-axis. This parameter is only available
for channels with multi-channel output configurations.
590