User Manual

Sample Editor
Range Editing
NOTE
You can zoom in horizontally to a scale of less than one sample per pixel. This is required
for drawing with the Draw tool.
●
If you have zoomed in to one sample per pixel or less, the appearance of the samples
depends on the Interpolate Audio Waveforms option in the Preferences dialog (Event
Display—Audio page).
Zoom Submenu
The Zoom submenu of the Edit menu contains options for zooming in the Sample Editor.
● To open the Zoom submenu, select Edit> Zoom.
The following options are available:
Zoom In
Zooms in one step, centering on the project cursor.
Zoom Out
Zooms out one step, centering on the project cursor.
Zoom Full
Zooms out so that the whole clip is visible in the waveform display.
Zoom to Selection
Zooms in horizontally and vertically so that the current selection fills the waveform
display.
Zoom to Selection (Horiz.)
Zooms in horizontally so that the current selection fills the waveform display.
Zoom to Event
Zooms in so that the waveform display shows the section of the clip corresponding
to the edited audio event. This is not available if you have opened the Sample Editor
from the Pool.
Zoom In Vertically
Zooms in one step vertically.
Zoom Out Vertically
Zooms out one step vertically.
Undo/Redo Zoom
Allows you to undo/redo the last zoom operation.
Range Editing
In the Sample Editor you can edit selection ranges. This option is useful if you want to quickly
edit or process a specific section in the audio waveform, or if you want to create a new event or
clip.
You can only select one range at a time. The selection is indicated in the Selection field on the
Info Line.
The Range section in the Inspector contains functions for working with regions.
RELATED LINKS
Range on page 454
457