User Manual

Audio Effects
Insert Effects
● macOS: User/Documents
In the MixConsole, the frozen audio channel is indicated by a snow flake symbol above the
channel name. You can still adjust the level and panning, make EQ settings and adjust the effect
sends.
AFTER COMPLETING THIS TASK
To unfreeze a frozen track, click Freeze again.
Insert Effects in Multi-Channel Configurations(Cubase Pro only)
You can insert VST 2 and VST 3 effects on tracks with a multi-channel configuration. However, not
all effect plug-ins support multi-channel processing.
Mono or stereo effects can only process 1 or 2 channels, whereas surround-capable plug-ins are
applied to all speaker channels, or to a subset of these.
●
To set up to what speaker channels the insert effect is applied, use the Routing Editor.
RELATED LINKS
Routing Editor on page 398
Routing Insert Effects through Specific Audio Channels
If you insert a stereo insert effect on a multi channel track, the first speaker channels of the
track are routed through the available effect channels. The other channels remain unprocessed.
However, you can route the effect through different speaker channels.
PROCEDURE
1. In the track list, click Edit Channel Settings to open the Channel Settings window for the
track on which the effect is inserted.
2. On the Inserts section, click Routing to open the Routing tab.
3. Double-click the signal diagram for the insert effect to open the Routing Editor.
The first speaker channels of the track are routed through the available effect channels.
4. Optional: Activate Link to link the input and output channel assignment.
5. Click the arrow buttons to route different speaker channels through the effect.
RESULT
The effect is routed through different channels of the audio.
397