User Manual

Audio Effects
Insert Effects
Rearranging Insert Effects
You can change the position of an insert effect in the signal chain of the audio channel by moving
it to a different slot of the same channel. You can also move an insert effect to another audio
channel.
PREREQUISITE
You have added at least one insert effect to an audio channel.
PROCEDURE
1. Select Studio> MixConsole.
2. In the Inserts rack, locate the insert effect that you want to rearrange.
3. Drag the insert effect and drop it on an insert slot.
RESULT
The insert effect is removed from the source slot and placed on the destination slot. If the
destination slot already contains an insert effect, this effect is moved to the next insert slot.
Deactivating Insert Effects
If you want to listen to a track without having it processed by an effect, but do not want to
remove this effect completely from the insert slot, you can deactivate it.
PREREQUISITE
You have added an insert effect to an audio channel.
PROCEDURE
1. In the track list, select the audio track with the insert effect that you want to deactivate.
2. In the Inspector, open the Inserts section, and Alt-click Bypass Insert.
RESULT
The effect is deactivated and all processing is terminated, but the effect is still loaded.
Bypassing Insert Effects
If you want to listen to the track without having it processed by a particular effect, but do not
want to remove this effect completely from the insert slot, you can bypass it. A bypassed effect is
still processing in the background. This allows for crackle-free comparison of the original and the
processed signal.
PREREQUISITE
You have added an insert effect to an audio channel.
PROCEDURE
1. In the track list, select the audio track with the insert effect that you want to bypass.
395