User Manual

MixConsole
MixConsole Window
Determines the width of the affected frequency range. Higher values give narrower
frequency ranges.
5 Type
Opens a pop-up menu where you can select an EQ type for the band. Bands 1 and 4 can
act as parametric, shelving, or high/low-cut filters. EQ bands 2 and 3 are always parametric
filters.
RELATED LINKS
Making Filter Settings on page 345
Saving/Loading EQ Presets
You can save and load EQ presets.
PROCEDURE
● In the top right corner of the EQ rack, open the presets pop-up menu and perform one of
the following actions:
●
To save the current settings as a preset, select Save Preset and name your preset.
●
To load a preset, select Load Preset and select a preset.
NOTE
You can also apply EQ together with insert and channel strip settings from track presets.
You can load, tag, and save EQ presets in the MediaBay.
Channel Strips
The Channel Strip rack is only available for audio-related channels. It allows you to load built-in
processing modules for separate channels.
NOTE
This channel rack is only available in the MixConsole window.
Channel Strip Modules
The channel strips allow you to apply modules directly to specific channels. You can change the
position of specific modules in the signal flow via drag and drop.
Gate
Allows you to silence audio signals below a set threshold level. As soon as the signal
level exceeds the set threshold, the gate opens to let the signal through.
Compressor
Allows you to create smooth compression effects. Drag the compressor up or down
to change its position in the signal flow.
EQ
Allows you to make EQ settings.
Tools
Provides various tools.
Sat
Allows you to add warmth to the sound.
350