User Manual

Setting Up Your System
Setting Up Audio
Port System Name
The system name of the port.
Show As
Allows you to rename the port. This name is used in the Input Routing and Output
Routing pop-up menus.
Visible
Allows you to activate/deactivate audio ports.
State
The state of the audio port.
Using External Clock Sources
If you are using an external clock source, Cubase must be notified that it receives external clock
signals and derives its speed from that source.
PROCEDURE
1. Select Studio> Studio Setup.
2. In the Devices list, select your audio hardware driver.
3. Activate Externally clocked.
RESULT
Cubase now derives its speed from the external source.
NOTE
For proper audio playback and recording, you must set the sample rate of the project to the
sample rate of the incoming clock signals.
When a sample rate mismatch occurs, the Record Format field on the status line is highlighted
in a different color. Cubase accepts a sample rate mismatch, and playback is therefore faster or
slower.
Using Several Audio Applications Simultaneously
You can allow other applications to play back via your audio hardware even though Cubase is
running.
PREREQUISITE
Other audio applications accessing the audio hardware are set to release the audio driver.
PROCEDURE
1. Select Studio> Studio Setup.
2. In the Devices list, select VST Audio System.
3. Activate Release Driver when Application is in Background.
RESULT
The application that has the focus gets access to the audio hardware.
16