User Manual

Project Handling
About Template Files
●
Track Pictures
About Template Files
Templates can be a good starting point for new projects. Templates are projects where you can
save all settings that you regularly use, such as bus configurations, sample rates, record formats,
basic track layouts, VSTi setups, drum map setups, etc.
The following template types are available from within the Hub:
●
Factory templates for specific scenarios. These are listed in the Recording, Scoring,
Production, or Mastering categories.
●
The default template. This is listed in the More category.
●
Any new user templates that you create and save. These are listed in the More category.
Template projects are not saved in project folders and therefore contain no subfolders and no
media files.
●
To open the location of a specific template, right-click a template in the template list and
select Show in Explorer (Windows only) or Reveal in Finder (macOS only).
Saving a Project Template File
You can save the current project as a template. When you create a new project, you can select
this template as a starting point for your new project.
PREREQUISITE
Remove all clips from the Pool before you save the project as a template. This ensures that
references to media data from the original project folder are deleted.
PROCEDURE
1. Set up a project.
2. Select File> Save as Template.
3. In the New Preset section of the Save as Template dialog, enter a name for the new
project template.
4. In the Attribute Inspector section, double-click the Value field of the Content Summary
attribute to enter a description for the template.
87