User Manual

Track Handling
Track Presets
Loading Inserts and EQ from Track Presets
Instead of loading complete track presets, you can also apply insert or equalizer settings from
track presets.
PROCEDURE
1. Select a track, open the Inspector or the Channel Settings window, and click the VST
Sound button on the Inserts or Equalizers section.
2. Select From Track Preset.
3. In the preset browser, select a track preset.
4. Double-click the preset to load the settings.
Extracting the Sound from an Instrument Track or VST Preset
For instrument tracks, you can extract the sound of an instrument track preset or VST preset.
PROCEDURE
1. Select the instrument track to which you want to apply a sound.
2. In the Inspector, click VST Sound.
3. In the preset browser, select an instrument track preset or VST preset.
4. Double-click the preset to load the settings.
RESULT
The VST instrument and its settings (but no inserts, EQs, or modifiers) on the existing track are
overwritten with the data of the track preset. The previous VST instrument for this instrument
track is removed and the new VST instrument with its settings is set up for the instrument track.
Track Quick Control Presets
For audio, instrument, MIDI, FX, and group tracks, you can save and load your own Quick Control
assignments as presets or use the factory presets.
Saving/Loading Track Quick Control Assignments as Presets
PROCEDURE
1. In the Inspector for your track, open the Quick Controls section.
For instrument tracks, the track quick controls are set to the 8 default VST quick controls of
the loaded instrument by default.
2. Click Preset Management in the top right corner of the Quick Controls section and select
one of the presets.
The Track Quick Control assignment changes and gives you access to the channel
parameters.
184