User Manual

Audio Functions
Spectrum Analyzer
Auto
Activate this option to analyze the audio event and update the display automatically
every time you change the settings.
NOTE
If you are working with very long files, consider deactivating the Auto option as this
may slow down the process.
Removing Silent Sections
The Detect Silence dialog allows you to detect and remove silent sections of your audio.
PROCEDURE
1. Select one or multiple audio events with silent sections in the Project window.
2. Select Audio> Advanced> Detect Silence.
3. In the Detect Silence dialog, make your settings.
4. Click Compute to analyze the audio.
The audio is analyzed and the waveform redrawn to indicate which sections are
considered silent according to your settings. The number of detected regions is displayed.
5. Optional: Click Preview to listen to the result.
The event is played back and the sections are silenced according to your settings.
6. Optional: In the Detection section, readjust the settings until you are satisfied with the
result.
7. Optional: In the Output section, activate Add as Regions.
8. In the Output section, activate Strip Silence.
9. Click Process.
RESULT
The event is split and the silent sections are removed.
AFTER COMPLETING THIS TASK
If you have selected more than one event and did not activate Process all selected Events, the
Detect Silence dialog opens again after processing, allowing you to make separate settings for
the next event.
Spectrum Analyzer
The Spectrum Analyzer analyzes the selected audio, computes the average spectrum, and
displays it in a two-dimensional graph, with frequency range on the x-axis and level distribution
on the y-axis.
● To open the Spectrum Analyzer, select Audio> Spectrum Analyzer.
Spectrum Analyzer Settings
The Spectrum Analyzer shows the following settings:
440