User Manual

MixConsole
MixConsole Window
Listen Mode(Cubase Pro only)
The listen mode allows you to quickly check the signal that is coming from selected channels
without interrupting and interfering with the actual mix. During a recording session it allows
the sound engineer in the control room to attenuate the signal that is coming from one of the
musicians while the recording continues undisturbed, for example.
NOTE
To enable the listen mode, you need to enable the Control Room.
●
To enable the listen mode, click Listen for a channel.
This routes the channel to the Control Room without interrupting the signal flow.
●
To turn off listen mode for all channels simultaneously, click Deactivate All Listen States
on the MixConsole toolbar.
Using Channel Settings
You can open each MixConsole channel in a separate Channel Settings window. This allows for
better overview and editing of the channel settings.
●
To open the channel settings for a specific channel, click E in the fader section.
The Channel Settings window for audio-related channels is divided into several sections:
●
Channel Inserts
●
Channel Faders
●
Direct Routing
●
Channel Sends
The Channel Strip and Equalizer are always available.
The sections are arranged in zones at the left and right of the Channel Settings window.
●
To show a pane with options to open or close the sections, position the mouse pointer at
one of the edges of the Channel Settings window.
The channel settings are especially suitable for the following actions:
●
Routing inserts
338