User Manual

Recording
MIDI Recording Specifics
4. When you have played some audio material that you want to capture (either in Stop mode
or during playback), click Record.
5. Stop the recording after a few seconds.
This creates an audio event that starts where the cursor position was when you activated
recording. If you were in stop mode, and the cursor was at the beginning of the project,
you may have to move the event to the right in the next step. If you were playing along to
a project, you leave the event where it is.
6. Select the Object Selection tool and place the cursor on the bottom left edge of the event
so that a double arrow appears. Then click and drag to the left.
RESULT
The event is now extended, and the audio that you played before activating the recording is
inserted. This means that if you played along during playback, the captured notes end up exactly
where you played them in relation to the project.
RELATED LINKS
Record - Audio on page 1032
Recovering Audio Recordings after System Failure
Cubase allows you to recover audio recordings after a system failure, because of a power cut or
other mishap, for example.
When you experience a computer crash during a recording, relaunch the system and check the
project record folder. By default, this is the Audio subfolder inside the project folder. It should
contain the audio file that you recorded, from the moment when you started recording to the
time when your computer crashed.
NOTE
●
This feature does not constitute an overall guarantee by Steinberg. While the program
itself was improved in such a way that audio recordings can be recovered after a system
failure, it is always possible that a computer crash, power cut, etc. might have damaged
another component of the computer, making it impossible to save or recover any of the
data.
●
Do not try to actively bring about this kind of situation to test this feature. Although the
internal program processes have been improved to cope with such situations, Steinberg
cannot guarantee that other parts of the computer are not damaged as a consequence.
MIDI Recording Specifics
Preparations
The preparations described in the following sections mainly focus on external MIDI devices.
MIDI Instruments and Channels
Most MIDI synthesizers can play several sounds at the same time, each on a different MIDI
channel. This allows you to play back several sounds (bass, piano, etc.) from the same
instrument.
Some devices, such as General MIDI compatible sound modules, always receive on all 16 MIDI
channels. If you have such an instrument, there is no specific setting to make in the instrument.
On other instruments, you must use the front panel controls to set up a number of parts,
timbres, or similar so that they all receive on one MIDI channel.
246