User Manual

MIDI Modules Reference
CC Mapper
529
CC Mapper
This MIDI module allows you to map MIDI controllers to other MIDI controllers before they
are passed on to the following layers and zones. You can also use it to transform incoming
values using curves.
MIDI controllers, aftertouch, and pitchbend can be mapped freely to all MIDI controllers,
aftertouch, pitchbend, and the eight global controllers, that is, Contr. A to Contr. H.
The global controllers allow you to change the MIDI controller assignment via a single
setting in the CC Mapper, instead of changing the modulation matrix assignments of the
zones separately, for example. This can be achieved by assigning them in the modulation
matrix and mapping a MIDI controller or velocity to them using the CC Mapper.
RELATED LINKS
Handling Section and Module Presets on page 21
CC Mapper Parameters
Source
Determines the source controller that is to be remapped.
Controller
This column lists the available destination controllers.
Bypass
Allows you to deactivate the remapping for a controller.
Min
Determines the minimum value to be sent.
Max
Determines the maximum value to be sent.
Curve and Range Editor
You can set up a curve and a range for each remapped source. The curve and range editor
displays the settings of the selected source controller, displayed by an orange frame.
To select a different source, click the button to the left of it.