Plug-in Reference

Depth
Sets the intensity of the pitch modulation.
Rate
If Tempo Sync is activated, Rate allows you to specify the base note value for tempo-
syncing the effect (1/1 to 1/32, straight, triplet, or dotted).
If Tempo Sync is deactivated, the modulation speed can be set freely with the Rate
dial.
Sync
Activates/Deactivates tempo sync.
Spatial
Adds a stereo effect to the modulation.
VintageCompressor
VintageCompressor is modeled after vintage type compressors.
This compressor features separate controls for Input and Output gain, Attack, and Release. In
addition, there is a
Punch mode which preserves the attack phase of the signal and a program-
dependent Auto Release function.
VU Meter
Shows the amount of gain reduction.
In/Out Meters
Show the highest peaks of all available input and output channels.
Input
Determines the compression amount. The higher the input gain, the more
compression is applied.
Attack (0.1 to 100 ms)
Determines how fast the compressor responds. If the attack time is long, more of the
initial part of the signal passes through unprocessed.
Punch
If this is activated, the early attack phase of the signal is preserved, retaining the
original punch in the audio material, even with short Attack settings.
Release (10 to 1000 ms or Auto mode)
Sets the time after which the gain returns to its original level. If Auto Release
is activated, the plug-in automatically nds the best release setting for the audio
material.
Included VST Audio Effect Plug-ins
VintageCompressor
62
Dorico 4.0.31