Plug-in Reference

The following module-specic settings are available in the Module Settings window:

Scale

Allows you to select a scale according to different broadcast standards (Internal,

Digital, DIN, EBU, British, Nordic, K-20, K-14, K-12, +3 dB Digital, +6 dB Digital,

+12 dB Digital, VU dB, and VU dBFS).

Peak Hold

Species for how long the peak levels are held in the display.

Peak Fallback

Sets the speed of release for the level meters and peak indicators.

NOTE

● Alternatively, you can move the mouse pointer over the selected module, hold ,

and use the mouse wheel to adjust this parameter.

● If this control is turned all the way to the left, the peak indicators are disabled.

Meter Mode

Sets the behavior of the needle.

● VU mode imitates the physical behavior of an analog VU meter that shows the

current peak value.

● Peak mode shows the current peak value.

● RMS mode shows the current RMS value.

Offset

Sets the offset between measured and displayed value in dB.

This parameter is only available for the DIN, EBU, British, and Nordic scale.

Clipping

Sets the clipping value for the Internal scale.

Minimum

Sets the minimum value for the Internal scale.

Maximum

Sets the maximum value for the Internal scale.

Color

Sets the color of the meters. You can choose between the Track color and a Dark or

Light scheme.

RMS AES17

Shows the level in accordance with AES17 (RMS + 3 dB).

RMS Resolution

Sets the RMS resolution for the level display in milliseconds.

Included VST Audio Effect Plug-ins

SuperVision

Dorico 4.0.31