2.0
Table Of Contents
- Introduction
- The DSP Factory in Cubase SX/SL
- Setting up Cubase SX/SL for use with DSP Factory
- The Default Signal Routing
- Opening the DSP Factory Windows
- The Input Console window
- The Bus/Aux Console
- The Channel Overview
- The FX Editor
- The DSP Factory Output Patchbay Window
- Changing the Input Routing
- Changing the Output Routing
- Single-Track Recording
- Multi-Track Recording
- Mixing down to a Stereo Output
- Mixing down to a new Track in Cubase SX/SL
- Working with two DS2416 Cards
- Combining a DS2416 with a SW1000XG Card
- Remote Controlling the DSP Factory Mixer
CUBASE SX/SL
3
Introduction
The Yamaha DSP Factory is an audio hardware system for profes-
sional digital multitrack recording and mixing on personal computers.
The core of this system is the DS2416 Digital Mixing Card, a PCI-bus
audio card with professional specifications, extensive mixing capabili-
ties and on-board EQ, dynamics and effects. It is possible to install
and digitally connect two DS2416 cards in one computer. Each card
can also be used with one or two optional AX44 Audio Expansion
Units, for up to eight additional analog inputs and outputs per card.
This manual assumes that you have at least one DS2416 installed,
tested and running under Windows 2000 or XP.
❐
For information about how to install, test and troubleshoot the DS2416,
please refer to the documentation supplied with the card. There you will
also find detailed information about audio hardware specifications and
features.