7.5

436
Remote controlling Cubase
Setting Up
3. Select your MIDI control device model from the Devices list.
Depending on the selected device, either a list of programmable function
commands or a blank panel is shown in the right half of the dialog window.
4. Select the correct MIDI input from the pop-up menu.
If necessary, select the correct MIDI output from the pop-up menu.
5. Click OK to close the dialog.
You can now use the MIDI control device to move faders and knobs, activate Mute
and Solo, etc. The exact parameter configuration depends on which external MIDI
control device you are using.
• A white stripe in the Project window and in the MixConsole indicate which
channels are currently linked to the remote control device.
!
Sometimes communication between Cubase and a remote device is interrupted or
the handshaking protocol fails to create a connection. To re-establish communication
with any device in the Devices list, select it and click the Reset button in the lower part
of the Device Setup dialog. The “Send Reset Message to all Devices” button at the
top left of the dialog next to the “+” and “-” buttons will reset every device in the
Devices list.